McDavid Sacro Cynch Elastic Back (A493)

INSTRUCTIONS FOR USE

• Detach both outer straps so they are not connected to the pile.
• Leave these loose for now.
• Apply the brace to your lower back from behind.
• Position evenly on either side of the spine.
• With the outer layer straps unattached, close the inner layer at front of brace.
• Adjust for comfort.
• Inside layer should should be applied with low-medium compression and pressure.
• If the inside layer is applied too tightly this may damage your brace and void warranty.
• With both hands take hold of the two outer straps, clench tightly and stretch both in a forward direction towards the front of brace.
• Attach to pile over inside layer at front.
• Hook/loop fabric will hold the outer straps in the position you attached them.
• The harder you pull and apply, the more compressive the brace will be.
• This is where the power and compression is achieved ... not from the inside layer.
• Adjust for final compression and personal comfort.
• Back-up plan now in place!
• There is no time specific limit that one should wear the brace. Wear it for as long and whenever you would ike to.
• You may sleep in the brace if necessary however whilst lying in bed you should not need it.